Jaguar Gaskets

LOWER ENGINE O-RING & TEFLON CRANK SEAL UPGRADE KIT. Includes EAC8815 EAC1341 C19654 C36499 C8649 C21848 EAC8840. Fits 1980-1987 XJ6. THESE UPGRADED PARTS ARE NOT INCLUDED IN THE STANDARD JLM9713 LOWER SET! (10527)

REAR MAIN ENGINE SEAL, SET OF TWO, FITS ALL 4.2 LITER XJ6 MODELS, 1976-1989 5.3 V12 up to ENG# 8S66782. Replaces EBC1705 (C19654)

PLUG FOR THE CRANKSHAFT OIL GALLEYS, FITS ALL 4.2 LITER ENGINES. (C23761)

FRONT CRANKSHAFT SEAL KIT, WITH NEW DISTANCE PIECE, TEFLON STYLE SEAL AND O-RING, FITS 1969-1987 XJ6. (JLM1171)

GASKET SET, WATER RAIL TO INTAKE MANIFOLD, FITS 1979-1987 XJ6. Includes three gaskets. Same as part number EAC1272. (JLM21364)

GASKET SET, HEAD, INCLUDES THE HEAD GASKET AND ALL GASKETS ABOVE THE HEAD GASKET. FITS 1978-1987 XJ6 FUEL INJECTED. Includes the head gasket and all gaskets above the head gasket. This is every gasket and seal you`ll need to remove, rebuild and re-install the cylinder head. Comes with qty 6 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 6 additional EBC3531 valve seals if you would like to install on the exhaust valves. (JLM9534)

GASKET SET, LOWER ENGINE, FITS 1978-1987 XJ6. Includes engine block, timing cover, and all other gaskets & seals BELOW the head gasket. COMES WITH THE STANDARD FRONT CRANK SEAL.......IF YOU WOULD LIKE TO UPGRADE TO THE TEFLON STYLE SEAL, ALSO PURCHASE PART# 10527! (JLM9713)

COPPER WASHER FITS XJS RADIATOR BLEED AND OIL FEED LINES AT REAR OF XJ6 AND XJS HEAD. (C4146)

HEAD GASKET SET, FITS XJ6 AND XKE FROM 1969-1973 (4.2 LITER ENGINE). Includes head gasket and all other engine gaskets above the head gasket. Comes with qty 6 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 6 additional EBC3531 valve seals if you would like to install on the exhaust valves. Replaces JLM9729 (DJ020)

O-RING FOR OIL RELIEF VALVE ON FILTER HOUSING FITS 1979-1987 XJ6. (EAC2087)

GASKET, OIL FILTER HOUSING TO ENGINE BLOCK, FITS 1980-1987 XJ6 FROM ENGINE NUMBER 8L157225 ON. For engines with factory-installed oil coolers. EAC2429 EAC6338 (EAC7377)

O-RING, CRANKSHAFT DISTANCE PIECE & OIL FILTER HOUSING, SEE #18 IN ILLUSTRATION. FITS 1980-1987 XJ6 AND 1982-1987 XJS V12 (EAC8101)