Jaguar Control Arms, Shafts & Bushings

CONTROL ARM SPACER, REAR SUSPENSION FITS 1976-1993 XJS & 1969-1987 XJ6. (C16628)

INNER FULCRUM SHAFT, REAR WISHBONE. FITS 1974-1987 XJ6 AND ALL XJS. (C17008)

BEARING TUBE, INNER FULCRUM REAR SUSPENSION WISHBONE FITS 1969-1987 XJ6 1976-1993 XJS (C171681)

SUSPENSION SEAL, FELT. SEE #21 IN ILLUSTRATION. QTY 2 REQ'D PER SIDE. FITS 1980-1987 XJ6, AND ALL XJS. (C20178)

FULCRUM SHAFT ASSEMBLY, LOWER WISHBONE, FRONT SUSPENSION FITS 1979-1987 XJ6 AND ALL XJS MODELS. C30722 (JLM11859)

BUSHING SET, FOR FRONT LOWER CONTROL ARM. FITS 1969-1987 XJ6 AND ALL XJS AND XKE. One set includes 4 bushings which does both sides of the car. (C8673)

BUSHING, FOR FRONT UPPER CONTROL ARM, FITS XJ6 FROM 1969-1989 AND ALL XJS AND V12 XKE. This is one bushing each car uses 4 so you will need to purchase 4 per car. C337451 (CAC9295)

BEARING & SEAL KIT, REAR HUB CARRIER LOWER PIVOT FITS 1969-1987 XJ6 and all XJS up to 1994 WITH INBOARD BRAKES. This kit has the bearings and seals for the outer wishbone. Each kit includes 4 C16029 bearings and 4 C20178 felt seals which is enough to do both sides of the car. The inner wishbone bearing and seal kit is part number C17167/SET. Kit includes rubber seals. One kit does both sides of the car. (C16029)

BEARING AND SEAL KIT, REAR CONTROL ARM PIVOT INBOARD AT THE DIFFERENTIAL. SEE BEARING #11 QTY 8 & SEAL #13 QTY 8 IN ILLUSTRATION. FITS 1969-1987 XJ6 AND ALL XJS MODELS. DOES BOTH SIDES OF THE CAR. THIS KIT HAS THE BEARINGS C17167 & SEALS C17213 FOR THE LOWER INNER CONTROL ARM. THE LOWER OUTER CONTROL ARM KIT IS C16029-SET. (C17167)

RUBBER SEAL, FOR THE BEARINGS ON THE INNER SWING ARM PIVOT. FITS 1980-1987 XJ6 AND 1976-1992 XJS. These seal the grease in the bearings, and can be found at the lower IRS pivot next to the differential. Each car takes eight. (C17213)

SEAL RETAINING RING, SWING ARM PIVOT AT THE DIFFERENTIAL. Each car takes eight. (C17936)

SEAL RETAINING RING, SWING ARM PIVOT AT THE DIFFERENTIAL. Each car takes eight. (C17936)