Jaguar Cruise Control Parts

ACTUATOR BELLOWS, CRUISE CONTROL, FOR THE DAC5964 CRUISE CONTROL ACTUATOR, FITS 1979.5-1987 XJ6 AND ALL V12 XJS. (AEU4090B)

NIPPLE FOR CRUISE CONTROL CABLE, DOES NOT INCLUDE SET SCREW FITS 1976-1992 XJS (CAC2552)

USED CABLE FOR CRUISE CONTROL FITS 1976-1992 XJS. Goes from cruise control bellows to the throttle. (CBC13821)

CRUISE CONTROL MASTER SWITCH. FITS XJS AND XJ6 UP TO 1987. This is the black on/off/resume switch on the console. (DAC2748)

USED CRUISE CONTROL ECU MODULE FITS 1980-1987 XJ6 AND 1976-1991 XJS. DAC3672 (DAC4293)

USED SPEED CONTROL INTERFACE UNIT IN TRUNK FITS 1988-1991 XJS. (DAC4864)

USED CRUISE CONTROL ACTUATOR ASSEMBLY, DOES NOT INCLUDE A NEW BELLOWS PART# AEU4090B-X, FITS 1980-1987 XJ6 AND XJS UP TO 1991. DAC1994 (DAC5964)

USED DUMP VALVE FOR CRUISE CONTROL, SEE # 2 IN ILLUSTRATION, FITS 1991-1994 XJ6 FROM VIN 629286, 1992-1994 XJS UP TO VIN 194774. NLA (DAC7237)

CRUISE CONTROL MASTER SWITCH, FITS 1988-1996 XJS. This is the black on/off/resume switch on the console. (DAC7528)

USED SPEED CRUISE CONTROL VACUUM ACTUATOR, FITS ALL 6.0 LITER XJ12 AND 1992-1996 5.3 AND 6.0 XJS MODELS. NLA (DBC3867)

BUSHING FOR SPEED CONTROL ACTUATOR FITS XJS 5.3 AND 6.0 FROM 1992-1996. This is the small plastic bushing that supports the rod connecting the cruise control actuator to the throttle pedestal. This goes bad due to typical underhood heat, and when it does, the throttle can stick open. Very bad! (EBC8031)

NLA CRUISE CONTROL CABLE RETAINER SCREW. Replaces UCS8113H (SH804121J)