Jaguar Gaskets

REAR MAIN ENGINE SEAL, SET OF TWO, FITS ALL 4.2 LITER XJ6 MODELS, 1976-1989 5.3 V12 up to ENG# 8S66782. Replaces EBC1705 (C19654)

TOP COVER (VALLEY) GASKET, V12 ENGINE. SEE #9 IN ILLUSTRATION. (C29485)

COPPER WASHER FITS XJS RADIATOR BLEED AND OIL FEED LINES AT REAR OF XJ6 AND XJS HEAD. (C4146)

SIDE SEAL FOR REAR MAIN BEARING CAP, 2 NEEDED PER ENGINE, FITS 5.3 AND 6.0 LITER V12 XJS AND XJ12 (C45154)

CYLINDER HEAD GASKET SET FITS 1976-1980 XJS AND XJ12 FUEL INJECTED ENGINES. Comes with qty 12 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 12 additional EBC3531 valve seals if you would like to install on the exhaust valves. replaced JLM9532 (CH832)

ENGINE REAR CRANKSHAFT SEAL, FITS 1988-1997 XJ6 AND ALL 4.0 XJS. (EAC4974)

OIL SEAL ENGINE AUXILIARY SHAFT. SEE #8 IN ILLUSTRATION. FITS 1992-1996 4.0 XJS, 1995-1997 XJ6 (EAC6156)

FRONT CRANKSHAFT SEAL, TIMING COVER SEAL, FITS 1988-1997 XJ6 AND ALL 4.0 XJS MODELS. (EAC7954)

O-RING, OIL FILTER HOUSING, FITS 1982-1987 XJS V12 (EAC8102)

GASKET, OIL DELIVERY PIPE FOR OIL PUMP FITS ALL V12 XJS (EAC9762)

GASKET, OIL SUCTION PIPE FOR OIL PUMP FITS ALL V12 XJS. C31063 (EAC9763)

GASKET ON THE ENDS OF THE INTAKE MANIFOLD, TRIANGLE SHAPED, FITS 1976-1992 XJS. (EAC9819)

O-RING NYLON SEAL FOR CAM COVER BOLT FITS 1988-1994 XJ6 AND 1994 4.0 XJS (EBC1294)

REAR CRANKSHAFT OIL SEAL, LIP TYPE, FITS 1989-1992 5.3 LITER V12 XJS FROM ENGINE NUMBER 8S66783 ON. Will not fit engines with the old-style rope seal. NLA (EBC2101)

REAR CRANKSHAFT MAIN OIL SEAL, LIP TYPE, FITS 1989-1992 5.3 LITER V12 XJS FROM ENGINE NUMBER 8S66783 ON. DOES NOT FIT EARLIER V12 WITH THE ROPE STYLE SEAL. (EBC2101)

GASKET BETWEEN OIL FILTER HOUSING AND BLOCK, FITS ALL 5.3 LITER V12 ENGINES (SAME AS EAC6337). (EBC9624)

GASKET, TIMING COVER TOP FITS 1988-1996 V12 XJS AND 1993-1996 XJ12 (EBC9625)

GASKET, ENGINE VALLEY COVER FITS 1988-1996 V12 XJS (EBC9631)

GASKET, TIMING COVER RIGHT SIDE FITS 1988-1996 V12 XJS AND 1993-1996 XJ12 (EBC9632)

GASKET, TIMING COVER LEFT SIDE FITS 1988-1996 V12 XJS AND 1993-1996 XJ12. EBC3281 (EBC9633)

GASKET SET, V12 WATER MANIFOLDS. DOES BOTH SIDES. FITS 5.3 LITER XJS. Includes 8 gaskets enough to remove and replace the two water rails along the side of the engine. C30344 (EBC9634)

GASKET, LARGER GASKET ON TOP OF SANDWICH PLATE, SEE #2 IN SECOND ILLUSTRATION. FITS ALL 1971-1996 JAGUAR 5.3 & 6.0 V12 ENGINES. EAC7252 (EBC9637)

OIL SEAL, FRONT CRANKSHAFT OIL SEAL, THIS INCLUDES THE METAL DISTANCE PIECE COLLAR, FITS 1980-1996 5.3 & 6.0 V12 ENGINES. C30002 C32197 (JLM10613)

HEAD GASKET SET, FITS 1988-1993 XJ6 AND 1994 XJS 4.0 LITER AJ6 up to engine number 179548. Includes head gasket and all other engine gaskets above the head gasket. You need to replace the head bolts when you reinstall the head. The head bolt set is part number EBC1771SET. These are special torque-to-release bolts that need to be replaced once they are used. Comes with qty 6 EBC3531 valve seals. Jaguar issued a tech bulletin that says to use these on the intake AND the exhaust valves even if your engine did not have them installed on the exhaust valves originally. Please order qty 6 additional EBC3531 valve seals if you would like to install on the exhaust valves. NLA (JLM11088)