U.S. Series III owners (1979-1987 XJ6). No doubt by now you’ve noticed that the fourth position on the headlight switch, marked “FOG” is unavailable, until now. The FOG position is a snap to enable. Just remove the bezel. If you look carefully you will see a small C clip at the base of the shaft. Pop it off and the switch will now turn all the way to the FOG position.
Fitting fog or driving lamps on a Series III car is easy. The car is already wired for them and the wires are the red/yellow wires found at either side of the hood by the hinge. Drill the mounting holes in the bottom of the aluminum bumper bar, bolt on your lights, and connect the wires. DONE. Now the “FOG” position will illuminate your fog or driving lamps in addition to your headlamps. NOTE: The FOG position will turn off your headlights when the fog lights are on. This is a European-style modification.
Pretty cool, huh? This is the kind of information that you get from subscribing to Jag Lovers. This synopsis of the fog lamp procedure was originally submitted to Jag Lovers by Gregory Andrachuk, who constantly provides the group with detailed, highly accurate information. If you haven’t subscribed yet, WHY NOT? You’re missing out. https://www.jag-lovers.org/
See our Jaguar Parts Store Catalog to order parts.
